Philips SRP620 Bedienungsanleitung Seite 8

SBC_SRP620_v2.qxd 26-04-2005 14:58 Pagina 8
Setup DVD-R functions
If you want to operate a Philips DVD-recorder do the
following:
Setup different RC systems for DVD/VCR
In case you have more than one VCR or DVD from Philips, you
might have choosen the option to change the RC system of
the VCR or DVD. If the DVD, DVD-R or VCR functions as
described above don't work, you can try the following:
For VCR system 2:
For DVD system 2:
For DVD-R system 2:
8
Instructions for use
1
Select the DVD/VCR mode by pressing once on the mode
key at the side.
- The DVD/VCR mode light should light up.
2
Press and hold 'OK' and digit 2 simultaneously for
5 seconds, until the mode lights blink twice.
- The DVD/VCR mode is now programmed for Philips DVD
recorders.
1
Select the DVD/VCR mode by pressing once on the mode
key at the side.
- The DVD/VCR mode light should light up.
2
Press and hold 'OK' and digit 6 simultaneously for
5 seconds, until the mode lights blink twice.
- The DVD/VCR mode is now programmed for Philips VCR
system 2.
1
Select the DVD/VCR mode by pressing once on the mode
key at the side.
- The DVD/VCR mode light should light up.
2
Press and hold 'OK' and digit 3 simultaneously for
5 seconds, until the mode lights blink twice.
- The DVD/VCR mode is now programmed for Philips DVD
system 2.
1
Select the DVD/VCR mode by pressing once on the mode
key at the side.
- The DVD/VCR mode light should light up.
2
Press and hold 'OK' and digit 4 simultaneously for
5 seconds, until the mode lights blink twice.
- The DVD/VCR mode is now programmed for Philips DVD-R
system 2.