One for All URC-7557 Bedienungsanleitung Seite 16

Shifted Macros
You can install a Shifted Macro on any key, except for the device
keys (TV, VCR, SAT, DVD and AMP), the MAGIC key, and the
NUMBER keys.
If for example, you want to program a shifted Macro on the POWER key,
simply press MAGIC once then the POWER key during step 3.
Now everytime you press MAGIC, then the POWER key, the ONE FOR LL
will turn off your TV, VCR and Satellite.
• To erase the Shifted Macro from the POWER key press:
MAGIC* 9 9 5
* Here you must hold down M GIC until the device key blinks twice.
- Each M CRO can consist of a maximum of 15 key strokes.
- Make sure that you program a Macro on a spare key that you don't use
in any mode.
- Once you program a Macro on a specific key, the sequence will work regardless
of the mode (TV, VCR, S T, DVD and MP) you are using.
- To avoid accidental recordings with the ONE FOR LL 5, you must press
the Record key twice to begin recording. Because of this, you cannot assign a
Macro or Shifted Macro to the Record key.
- If you had to hold down a key for a few seconds on the original remote control
to get a function, this function may not work in a macro on your ONE FOR LL
remote.
- If you program a Macro on a key, the original function will become shifted
(excluding CH+/- and VOL+/- keys). Press M GIC then the key to access it. If you
place a Macro shifted on a digit key, access the original function by pressing
M GIC twice and then the digit key.
- If a Shifted Macro is placed on the Channel and Volume keys then the Colour
and Brightness feature will be sacrificed.
WWW ONEFORALL COM
Extra Features
MAGIC POWER key MAGIC*
15