One for All URC-3710 Bedienungsanleitung Seite 12

To erase the Macro from the Red key, press:
1 Press and hold down the MAGIC key (for approximately 3
seconds) until the red LED (underneath the ON key) blinks twice.
The red LED will blink once, then twice.
2 Press 9 9 5. The red LED will blink twice.
3 Then press the Red key.
4 Press and hold down the MAGIC key (for approximately 3
seconds) until the red LED (underneath the ON key) blinks twice.
Shifted Macros
If you do not want to sacrifice any key it is also possible to install a
"Shifted Macro".
If for example, you want to program a shifted Macro on the TEXT
key.
Example: To switch your Television to Channel 3 textpage 801 with
one single keypress (e.g. MAGIC then the TEXT key):
1 Press and hold down the MAGIC key (for approximately 3
seconds) until the red LED (underneath the ON key) blinks twice.
The red LED will blink once, then twice.
2 Press 9 9 5. The red LED will blink twice.
3 Then press MAGIC followed by the TEXT key to which the Macro
will be assigned.
4 Next press 3, TEXT ON, 801.
5 To store the Macro, press and hold down the MAGIC key
(for approximately 3 seconds) until the red LED (underneath the ON
key) blinks twice.
To erase the Shifted Macro from the TEXT key press:
MAGIC*
To erase all Macro and Shifted Macro:
MAGIC*
* Here you must press and hold down the MAGIC key until the red LED
underneath the ON blinks twice.
- If you place a Macro shifted on a digit key, access the original function by
pressing the MAGIC key twice and then the digit key.
12
Extra Features
9 9 5 MAGIC
9 9 5 MAGIC*
TEXT key MAGIC*
WWW.ONEFORALL.COM