Fantini Cosmi C58RF Bedienungsanleitung Seite 8

s t a n d a R d
once the C58RF is installed and connected, it is possible
to use the daily program with the pre-set operating time
and temperatures, just positioning the switch on the a1
or a2 position.
Verify that the switch is in the Heating position.
a1 for weekdays
20 C°
17 C°
5 C°
6.30 8.30
C u s t o m i z a t i o n
it is possible to set the desired temperature for every 30 minutes.
1
set the temperature
t t
min maX
3
it is possible to set the desired
temperature pressing
the three keys. the sector will
change the colour and advance 30
minutes.
t
ComFoRt / maX
oFF
to move the switch without changing the
temperature, use the keys
J o l l Y F u n C t i o n
With this function C58RF enables you to cut out temporarily the automatic program
at any time, without changing its settings, in order to have constantly the required
temperature ComFoRt - eConomY - oFF for a period from 1 to 240 hours.
a1 a2
once the set time is passed, C58RF will resume the automatic program. to reduce or cut out the JollY
period before the set time, press a different colour key than the one shown on the ring.
8
11.30 13.30 17 22
one of
t
eConomY / min
With the switch in the a1 or a2 position, press the keys
set for how many hours the C58RF has to cut the automatic program out,
in order to force temporarily the temperature. the ring on the display
will change the colour according to the selected temperature.
t
eConomY /
a1
a2 for weekends and holidays
20 C°
5 C°
A1 A2
min
ComFoRt /
intellitherm
P R o g R a m s
a2
8
23.30
move the switches to the a1 or
a2 and PRog positions to start
the program setting.
the display will show time
00.00 and daY1.
on the programming ring the
sector which the temperature
has to be changed flashes and
corresponding time appears.
once the changes are finished,
position the switch
the heating or
air-conditioning.
t
maX
2
4
to start
to start the
or or to
oFF
e n g l i s h