Herunterladen Inhalt Inhalt Diese Seite drucken

Electrolux Ultrapower EUP86SSM Gebrauchsanweisung Seite 2

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
1
2
For models EUP82xxx
3
4
www.electrolux.com
ENGLISH
than 30 seconds (constant or interrupted) it will deactivate the brush
GB
roll and turn o" the nozzle front lights. The vacuum cleaner can still be
Thank you for choosing an Electrolux Ultrapower® vacuum cleaner.
used, even when the BRUSHROLLCLEAN® function is deactivated. To re-
In order to ensure the best results, always use original Electrolux
activate the BRUSHROLLCLEAN® function, place Ultrapower® on charge
FR
accessories and spare parts. They have been designed especially for
and charge for 15'minutes.
your vacuum cleaner. This product is designed with the environment
Please note that the BRUSHROLLCLEAN® function might not be able to
in mind. All plastic parts are marked for recycling purposes.
remove thicker threads or wires that are caught in the brush roll.
AR
DESCRIPTION OF ULTRAPOWER®
EMPTYING OF THE DUST CONTAINER
A. ON/OFF button
K. Cable protector grill
BG
9
Remove the dust container by pressing the button.
B. Power regulation button
L. Hatch cover for brush roll
10
C. Locking screw
M. Brush roll
Take out the ÿlters from the dust container by pressing the release but-
D. Charging station, wall unit (*
N. BRUSHROLLCLEAN® pedal
tons. Empty the contents into a dustbin. Never wash the dust container
CZ
E. Charging station, †oor unit (*
O. Nozzle front lights
or ÿlters in a dishwasher.
F. Charging adapter
P. Charging indicator
DA
G. Fine ÿlter (inner ÿlter)
Q. Cli" hanger
IMPORTANT ˜ FILTER CLEANING!
H. Pre ÿlter (outer ÿlter)
R. Wall holder *)
11
The ÿlters must be cleaned at regular intervals to ensure a high clean-
I. Release button, dust container
S. Charging connector*)
ing performance. Take out the ÿlters by pressing the release buttons.
DE
J. Dust container
Separate the inner ÿlter from the outer ÿlter.
12
(* Not available on models
*) Only on models EUP82xx.
Rinse the ÿlter parts carefully under lukewarm water without using any
EE
detergents. (Never use the dishwasher or washing machine.) Shake to
EUP82xxx
remove excess water and leave to dry minimum 12h before putting
BEFORE STARTING
them back into the cleaner.
ES
Check that the package includes all parts described in this instruction
manual and read this manual carefully. Pay special attention to the
CLEANING THE HOSE AND NOZZLE WHEELS
safety precautions chapter. Save these instructions.
13
FI
Loosen the hose behind the nozzle from its upper connection. Remove
any object or debris that can be blocking the air†ow in the hose or in
1
Assemble the handle.
the air channel to the dust cup, and put the hose back.
GR
For model EUP82xx, use the wall holder *):
14
If the wheels need to be cleaned or get jammed, remove them carefully
2
A) Make sure that Ultrapower® is on a stable and horizontal surface
by using a †at screwdriver.
away from heat sources, direct sunlight or wet places. Attach the wall
HR
holder to the wall 104'cm above the †oor with a suitable screw and wall
REMOVING AND CLEANING THE BRUSH ROLL
plug. Make sure to use a correct wall plug for the wall.
15
If the brushroll gets blocked Ultrapower® will stop. Open the cable
B) Attach the handle to the wall holder.
HU
protector grill and the brush roll hatch cover and remove the brush roll.
C) Connect the charging cable to the back side of the vacuum cleaner.
16
For all other models:
Use a pair of scissors to remove threads etc. Reassemble the brush roll,
IT
3
Assemble the charging stand.
making sure it can spin freely.
4
A) Connect the charging cable to the charge stand.
B) There is a hollow space in the bottom of the charging station where
REMOVING THE BATTERIES FOR RECYCLING
LT
unused cable can be wound.
Warning; Battery removal must only be done by an Electrolux
C) Position the charging station on a stable and horizontal surface away
service center or o°cial collection point!
from heat sources, direct sunlight or wet places.
17
Only remove batteries if the product is to be scrapped. Improper
LV
5
handling of the batteries may be hazardous. Batteries should always
Insert the adaptor into the mains and charge Ultrapower®. The charging
be completely discharged before removal. Take your product to an
indicator will be lit when Ultrapower® is on charge.
NL
Electrolux service center or o'cial collection point for recycling. They
can remove and recycle the battery and electric parts in a safe and pro-
CHARGING ULTRAPOWER®
fessional way. Follow your country's rules for collection of rechargeable
6
When fully charged, the charging indicator will blink slowly. The num-
NO
batteries and electrical products.
bers of LED lamps will indicate the level of charge. Full charging time is
around 5'hours. For better battery performance, charge Ultrapower® for
PL
24'hours before ÿrst use and always keep it on charge when not used.
Enjoy a great cleaning experience with Ultrapower®!
VACUUMING WITH ULTRAPOWER®
PT
Before vacuuming, check that the nozzle wheels and the brush roll are
clean from sharp objects in order to avoid scratching sensitive †oors
and to ensure full cleaning performance.
RO
7
Start and stop Ultrapower® by pushing the ON/OFF button. Ultrapow-
er® has 3 power settings which is regulated with the power regulation
RU
button.
Ultrapower® will start on the "High power mode".
For more silent cleaning and longest run time, press the power regula-
SK
tion button to activate the "Long runtime mode".
Press the power regulation button one more time to activate the "Nor-
mal cleaning mode".
SL
BRUSHROLLCLEAN® FUNCTION
SR
Use the BRUSHROLLCLEAN® function to keep the brush roll clean and
free from hair and ÿbres. For best results use the BRUSHROLLCLEAN®
function when Ultrapower® is fully charged.
SV
8
Place Ultrapower® on a hard and †at surface. Do not use the BRUSH-
ROLLCLEAN® function on carpets.
Press the BRUSHROLLCLEAN® pedal with your foot while the cleaner is
TR
on. Hold for 5 seconds until hairs and ÿbres are removed. There will be
a cutting noise during this process, this is normal. If hairs remain on the
UA
brush roll, repeat the process.
The BRUSHROLLCLEAN® function is equipped with an overheating
Electrolux reserves the right to change products, information and
protection. If the BRUSHROLLCLEAN® function has been used for more
speciÿcations without notice.
2
www.electrolux.com
4
5
6
7
8
9
10
11
12
13
14
15
16
17
www.electrolux.com
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis