NEC NP01WK Installationshandbuch Seite 14

4. Adjust the tilt.
Tilt adjustment is performed with the four adjustment knobs.
 Front/rear tilt adjustment
 Left/right tilt adjustment
Fine adjustment in same direction as for vertical adjustment
• If tilt adjustment achieved with these knobs is not sufficient, repeat the adjustment process from
step 2 on page ENG-12.
• During adjustment, the position of the projected image may shift. In such a case, loosen the wall
adapter and arm fixation screws and adjust the position.
This completes the adjustment.
Securely tighten all screws and adjustment knobs.
Adjust together
Adjust together
Rotation axis
ENG-14
Rotation axis