Herunterladen Diese Seite drucken

Stryker VISION ELECT HDTV Handbuch Seite 6

26-zoll-high-definition lcd-monitor
Vorschau ausblenden Andere Handbücher für VISION ELECT HDTV:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 56
14. The unit is designed for operation in a horizontal position. Do not
operate the unit in a vertical position.
15. Keep the unit away from equipment that uses strong magnets
(i.e., large loudspeakers).
16. Do not touch the patient with signal input or output connectors.
Equipment with SIP/SOP connectors should either comply with
IEC 60601-1 and/or IEC 60601-1-1 harmonized national
standards or the combination should be evaluated.
17. CAUTION: Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
Note
This equipment has been tested and found to comply with
the limit for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. There is no
guarantee that interference will not occur in a particular
installation, which can be determined by turning the
equipment off and on. The user is encouraged to try to
correct the interference by one or more of the following
measures:
18. To ensure electromagnetic compatibility, refer to the
"Electromagnetic Compatibility" section of this manual. The
VISION ELECT HDTV (model 240-030-960) monitor must be
installed and operated according to the EMC information
provided in this manual.
The VISION ELECT HDTV (model 240-030-960) monitor has been tested
under the AAMI ES60601-1 standard and is UL listed for medical
application.
The warranty is void if any of these warnings or cautions are
disregarded.
EN-4
Reorient or relocate the receiving device.
Increase the separation distance between the
equipment.
Connect the equipment to an outlet on a circuit
different from that to which the other device(s)
are connected.
Consult the manufacturer or field service
technician for help.

Werbung

loading

Verwandte Produkte für Stryker VISION ELECT HDTV