Werbung
Verfügbare Sprachen
Verfügbare Sprachen
POSITION IN CHAIN
Continuation of "Chain Size": Now assign numbers
to each of your 6 Mobilights. Start with number 1,
and finish with 6, from left to right, for instance.
By calling up programs with colour gradients, you
can observe how effects and flow will, from now
on,"run" over your various devices. Please make
sure that all Mobilights are in the same group.
OPTIONS: 1 - 50
VISIBILITY: Only in Standalone | Remote
Control-Mode and in DMX | W-APE (Receiver) |
WDMX-Modus, if „3C"-DMX-Mode is activated
PROGRAM
The first programs are "solid colours", followed
by colour gradients and effects. Choose whatever
pleases you!
OPTIONS: 1 - 20
VISIBILITY: Only in Standalone and Remote
Control-Mode
SPEED
Select the speed for the effect/color chaser of the
current program. The value „0" stops the effect.
OPTIONS: 0 (stop) ... 100 (fastest)
VISIBILITY: Only in Standalone and Remote
Control-Mode
BRIGHTNESS
Decide steplessly on brightness.
OPTIONS: 0 - 100
VISIBILITY: Only in Standalone and Remote
Control-Mode
W-APE TRANSMITTER
This is an ape labs' exclusive! A wireless DMX tran-
sceiver is integrated in every Mobilight. Hereby, you
can, for instance, connect a Mobilight with your light
board via DMX cable, and then activate this menu
item. The Mobilight now transfers a wireless DMX
signal to all other Mobilights, as well as to other ape
labs products, automatically. In other words, you
do not need any separate wireless DMX transmit-
ter. Nevertheless, ape labs also offers separate
wireless DMX transmitter with higher transmitter
power.
OPTIONS: Enabled | Disabled
VISIBILITY: Only in DMX | W-DMX mode
GROUP
Suppose you have up to 4 different rooms in close
vicinity to each other, and you would like to operate
all rooms differently. In this case, will assign your
devices to different groups. You can thusly control
up to 4 "areas" individually by remote control. This
also applies for the "Mobilights' talking to each
other".
OPTIONS: 1 - 4
VISIBILITY: Only in Remote Control | W-APE
(Receiver) mode and if „WAPE-Transmitter" is
activated
INFO
The battery status is indicated here. This is the
most important point. Device running time, serial
number as well as several other information are
displayed here too.
OPTIONS: Battery status, Device running time,
serial number and more
VISIBILITY: Always
7
Werbung
