Additional Information; Connecting The Switch - D-Link DES-1018MP Schnellinstallationsanleitung

2. Plug the power cord into the power socket
of the Switch.
Figure 8. Plug the power cord into the socket
3. Slide the retainer through the tie until it
reaches the end of the cord.
Figure 9. Slide the Retainer
4. Wrap the tie of the retainer around the
power cord and back into the retainer to
lock it. Fasten the tie until the power cord
is secured.
Figure 10. Fasten the Tie to the Cord

Connecting the Switch

Users can now attach IEEE 802.3af compliant
devices to the PoE ports on the DES-1018MP
by plugging in an Ethernet cable. There are
three types of connections that can be made:
• Switch to End Node
Use standard Ethernet cables to connect
the Switch to PCs outfitted with 10/100
Mbps RJ-45 Network Interface Cards or
routers.
• Switch to Hub or Switch
Use straight or crossover cables to connect
the Switch to another switch or hub.
• Connecting to a Server
Use any port to connect the Switch to a
network backbone or network server.

Additional Information

You can refer to the user manual or visit
http://support.dlink.com online for more
support.
• D-Link Unmanaged Switch User Manual
This manual describes the general
installation and how to connect the Switch
in various scenarios.
Online Support
If there are any issues that are not in the user
manual, please visit http://support.dlink.com,
which will direct you to your appropriate local
D-Link support website.
Warranty Information
The D-Link Limited Lifetime Warranty
information is available at
http://warranty.dlink.com/
5