Customer Service - Zwilling ENFINIGY POWER BLENDER PRO 53001 Bedienungsanleitung

GB
Problem
All program symbols and the
display on the blender base are
flashing and three beeps sound.
It is not possible to start the
mixing process.
The tamper does not display
any temperature.

Customer service

Please contact our customer service should you encounter any problems with your blender.
Detailed information on service, repairs, warranty and product registration can be found at
www.zwilling.com/service.
Disposal
With regard to disposal, please return your old appliance to a collection point for electrical appliances.
Dispose of the battery for the tamper at a collection point for batteries.
www.zwilling.com
Fault / Customer Service / Disposal
Possible cause
The blender bowl and the lid
have been removed during
operation.
The motor has overheated.
The blender bowl or the lid is
not attached correctly.
The blender has been stopped
and the selector switch has
been moved with the lid open.
The battery for the tamper is
empty.
Remedy
Reattach the blender bowl or lid
and continue as desired.
Put the selector switch in the on/
off position, unplug the appliance
and wait 30 minutes.
Place the blender bowl on the
base with the handle facing to
the right or front or attach the lid
correctly.
Put the selector switch in the on/
off position, press the power but-
ton and then switch the appliance
back on.
Change the battery.
29