Customer Service - Zwilling ENFINIGY PERSONAL BLENDER Bedienungsanleitung

Fault / Customer Service / Disposal
Problem Possible cause
The blender bowl was re-
moved from the base during
operation.
All program
symbols are
The selector switch is not in
flashing on the
the on/off position when the
blender base.
blender is plugged in.
The motor has overheated.
It is not possi-
The blender bowl does not
ble to start the
sit properly on the base.
mixing process.

Customer service

Please contact our customer service should you encounter any problems with
your blender.
Detailed information on service, repairs, warranty and product registration can
be found at www.zwilling.com/service.
Disposal
With regard to disposal, please return your old appliance to a collection point
for electrical appliances.
28
Remedy
Put the selector switch in the on/
off position. Then put the blender
bowl back on and continue as
desired.
Put the selector switch in the
on/off position and continue as
desired.
Put the selector switch in the on/
off position and wait 30 minutes.
Place the blender bowl on the
base by pressing it down.
GB