Pelgrim IK2064F Anleitung Seite 27

OPERATION
Select the desired function:
1. Cooking-timer — the timer is linked to a cooking zone. After the set time has elapsed,
the cooking zone will switch off automatically.
2. Alarm — the alarm only beeps after the set time has elapsed.
The alarm works in the same way as the cooking-timer, but is not linked to a cooking zone. If the
alarm has been set, it will continue running after the hob has been switched off. The alarm can
only be switched off when the hob is switched on.
Switching on the cooking-timer, activating and switching off
1. Press simultaneously the – and + button.
▷ If you have switched on a cooking zone prior to this, the accompanying display will be
brighter. The cooking-timer that you have now set applies to this cooking zone.
The decimal point next to the power level means that the time has been activated
for this zone.
The alarm can also be activated without a cooking zone being selected. Two flashing
▷
decimal points indicate that the alarm is counting down.
2. Set the cooking time using the – or + button. (When you press '-', the time will be set for
30 minutes. If you keep the button pressed the time will run faster).
• The time can be set to a value between 01 and 99 minutes. The cooking-timer can be set
for each cooking zone.
• Check the remaining time by selecting the cooking zone concerned while simultaneously
pressing the - and + button. Adjust the cooking time using the – or + button.
• After the set time has ended the '00' will flash in the display, as well as the timer's decimal
point. Furthermore you will hear a repeated short beep. Switch off the timer and alarm signal
by pressing a random button. If you don't do this, the signal will switch off automatically
after three minutes.
EN 11