Error Codes And Flashing Sequences - HomeMatic IP HmIP-WRCR Montage- Und Bedienungsanleitung

Troubleshooting
8.4

Error codes and flashing sequences

Error and
flashing codes
Short
orange
flashing*
1x long green
lighting*
Short orange
flashing
(every 10
seconds)
Short orange
lighting (after
green or red
confirmation)
1x long red
lighting
48
Meaning
Radio
transmission/
attempting to
transmit/data
transmission
Operation
confirmed
Teach-in mode
active
Batteries empty
Transmission
failed or duty
cycle limit is
reached
Solution
Wait until the
transmission is
completed.
You can continue
operation.
Enter the last four
numbers of the
device
serial number for
confirmation (see
"5.1 Teaching-in"
on page 37).
Replace the
batteries (see
"7 Replacing
batteries" on page
44).
Try again (see sec.
"8.2 Command
not confirmed" on
page 46 or "8.3
Duty cycle" on
page 47).