Removing Grease Filters; Replacing The Carbon Filter; Led Lighting - Pelgrim SLK645 Bedienungsanleitung

MAINTENANCE

Removing grease filters

Replacing the carbon filter

LED lighting

1. Pull the visor down and slide it out until it stops.
2. Push in the handle of the filter and remove the grease filter.
Use a carbon filter if the cooker hood is not connected to an exhaust duct.
Centre the carbon filter on the motor frame and turn it to mount it to the
motor frame.
Important:
• The saturation of the filter depends on the intensity of use, the
manner of cooking and the regularity with which the grease filters
are cleaned.
• The carbon filter must be replaced at least every six months
(or when the indicator – if present on the model – specifies this).
• Carbon filters are not washable for reuse. Saturated carbon is not
environmentally friendly, so replace the filter on time.
LED lighting may only be replaced by a qualified technician.
The lamp in this household appliance is intended exclusively for lighting
this appliance. The lamp is not suitable for lighting a household area.
EN 9