Removing The Grease Filters; Replacing The Carbon Filter; Changing The Light Bulbs - Pelgrim WA300RVS Bedienungsanleitung

MAINTENANCE
Grease filters
Carbon filter
Lighting

Removing the grease filters

Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Pull the grease filter towards you and tilt
it downwards at the front.

Replacing the carbon filter

The carbon filter must always be used if the cooker hood is not ducted.
• Remove the grease filters
• Attach the carbon filters to the filter.
• Replace the grease filters.
Note:
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.

Changing the light bulbs

• Remove the lamp cover.
• Replace the halogen light bulb with a replacement bulb with a
maximum output power of 20 Watts.
• Re-close the lamp cover.
EN 9