Installing Windows - ASROCK 980DE3/U3S3 Bedienungsanleitung

2.7 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.8 Installing Windows

TM
Vista 64-bit / XP / XP 64-bit With RAID Functions
If you want to install Windows
/ XP 64-bit on your SATA / SATA2 HDDs with RAID functions, please refer to the
document at the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.9 Installing Windows
TM
Vista
If you want to install Windows
/ XP 64-bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please
follow below procedures according to the OS you install.
2.9.1 Installing Windows
Functions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATA2 / SATA3 HDDs without NCQ and Hot Plug functions (IDE
mode)
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE] for SATA2 ports.
Set the "Onboard SATA3 Operation Mode" option to [IDE] for SATA3 ports.
STEP 2: Install Windows
22
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
64-bit / XP / XP 64-bit Without RAID Functions
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit on your SATA / SATA2 / SATA3 HDDs
Advanced screen
®
XP / XP 64-bit OS on your system.
ASRock 980DE3/U3S3 Motherboard
TM
/
TM TM
/ Vista 64-bit / XP
TM
/
TM TM
/ Vista 64-bit / XP
Storage Configuration.