Product Features - stayer BHL112BK Bedienungsanleitung

This manual is consistent with the date of manufacture
of your machine, you will find information on the
technical data of the machine acquired manual check
for updates of our machines on the website:
www.grupostayer.com
1_MACHINE-SPECIFIC SAFETY
WARNINGS
Wear ear protectors when impact drilling. Exposure
to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory or fastener may contact hidden wiring.
Cutting accessory and fasteners contacting a "live"
wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
Use appropriate detectors to determine if utility
lines are hidden in the work area or call the local
utility company for assistance. Contact with electric
lines can lead to fire and electric shock. Damaging a
gas line can lead to explosion. Penetrating a water
line causes property damage or may cause an electric
shock.
Switch off the power tool immediately when the
tool insert jams. Be prepared for high reaction
torque that can cause kickback.
The tool insert jams when:
— The power tool is subject to overload or
— It becomes wedged in the workpiece.
Hold the machine with a firm grip. High reaction
torque can briefly occur while driving in and loosening
screws.
Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn
or explode.
Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool.
Do not open the battery. Danger of shortcircuiting.
Protect the battery against heat, e. g., also
against continuous sun irradiation and fire.
There is danger of explosion.
In case of damage and improper use of the battery,
vapours may be emitted. Provide for fresh air
and seek medical help in case of complaints. The
vapours can irritate the respiratory system.
When the battery is defective, liquid can escape
and come into contact with adjacent components.
Check any parts concerned. Clean such parts or
replace them, if required.
Use the battery only in conjunction with your
Stayer power tool. This measure alone protects the
battery against dangerous overload.
2_FUNCTIONAL DESCRIPTION
PLACING OR FIXING THE TOOL
Read all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.

PRODUCT FEATURES

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Screwdriver bit
2 Keyless chuck
3 Torque preselection ring
4 Gear selector
5 Battery
6 "Power Light"
7 Rotational direction switch/Forward Touch Pad
PBL202BL/PBL204BL
8 On/Off switch / Reverse Touch Pad PBL202BL/
PBL204BL
9 Battery unlocking button
10 Battery charge-control indicator
11 Button battery charging indication
NOISE/VIBRATION INFORMATION
Identify additional safety measures to protect the ope-
rator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, orga-
nisation of work patterns.
- 17 -
safety warnings and
es
it
gb
de
fr
p
tr
all
gr
pl
cz