Weber Protect ProX1 Bedienungsanleitung Seite 71

The connection to the ProX1 takes a long time?
The connection between your smartphone / tablet and the ProX1 strongly
depends on your internet speed at the installation site. Please pay
WiFi repeaters can amplify the WiFi signal and ensure a better WiFi
1)
connection. Place the WiFi repeater as close as possible to your ProX1 to
maximize the WiFi signal. Also check whether the WiFi signal from your
router is still reaching your repeater at maximum strength. If this is not the
case, the repeater should be placed closer to the router. If only a small
amount of data arrives at the WiFi repeater, only this small amount of
data can be amplified. Therefore, it can make sense to use several
Turn off the power saving mode on your smartphone, as well as in the
2)
device settings of the ProX1. If your smartphone's battery is optimized,
apps will be blocked by your smartphone or only opened with a delay,
Check whether your smartphone/tablet, as well as your Router, has the
3)
Building materials such as metal, steel & concrete can negatively
4)
affect the WiFi signal. Large pieces of furniture or radio devices (e.g.
Bluetooth) can also cause interference with the WiFi signal. Therefore, pay
attention to these interference factors when installing the ProX1.
I don't receive any notification from the ProX1?
If you do not receive any notifications from the ProX1, This is mostly due to
the App authorizations and permissions of your smartphone / tablet. You
can manage the App authorizations and permissions in the smartphone
If your ProX1 has a technical defect, please contact the Weber Protect
customer service so that we can find a suitable solution for you.
Troubleshooting
attention to the following:
repeaters in some cases.
which can lead to connection problems.
latest software update.
settings under 'Applications' or 'Apps'.
The ProX1 has a defect?
69