Weber Protect ProX1 Bedienungsanleitung Seite 47

Step 4:
You will now be forwarded to the
next configuration
screen.
On the next screen, click on
'Enter The Configuration
Interface'.
You will be automatically
redirected to the WiFi settings of
your smartphone or tablet.
Step 3:
After mounting and turning on the
ProX1 camera, the LED indicator
flashes red. When the red LED
flashes, click on the button in the
app:
"THE RED LIGHT IS FLASHING".
Note: If the LED indicator does not flash
red, press the reset button for about 5-10
seconds until a short melody sounds and
the red LED starts to flash. Restart at Step 1.
45