First Switch On; Functions Menu; Select /Switch Off /Switch On; Temperature Regulation - Electrolux ERES3580 Benutzerhandbuch

First switch on

After plugging the plug into the power
outlet, if the display is not illuminated,
press key (A), appliance on.
For a correct storage of the food select
the Eco mode function that guarantee
the following temperature is set:
+5°C in the fridge
· To select a different temperature
see "Temperature regulation".

Functions Menu

By activating the key D the functions
menu is operating. Each function
could be confirmed by pressing button
E. If there is no confirmation after
some seconds the display will go out
from the menu and return in normal
condi-tion.
The following functions are indicated:
Ambient Temperature
Child Lock function
Shopping function
Eco Mode function
Drinks Chill function

Select /Switch off /Switch on

Temperature regulation

The temperature may be regulated by
pressing the key (B) to set the desired
temperature.
By pressing the key B the current tem-
perature setting flashes on the indica-
tor and by pressing the key B again it
is possible to change it.
You confirm the choice of the tempe-
rature either by pressing the key E,
(you will hear the buzzer) or by waiting
for some seconds (you will not hear
the buzzer).
Then the indicator shows the inside
compartment temperature again.
The newly selected-temperature must
be reached after 24 hours.
It is not necessary to set the tempera-
ture again after long periods of non
use as the temperature remains
stored.
Attention!
During the stability period by the first
starting the temperature displayed can
not correspond to the setting tempe-
rature. During this time it is possible
that the temperature displayed is
different than the setting temperature.

Switching off

The appliance is shut off by pressing
key (A) for more than 1 second. After
this, a countdown of the temperature
from -3 -2 -1 will be shown.

Ambient Temperature Function

The ambient temperature function is
activated by pressing key D (several
times if necessary) until the corres-
ponding icon appears
In this condition the selected tempera-
ture is the ambient temperature.
You must confirm the choice by
pressing key E within few seconds.
You will hear the buzzer and the icon
remains lighted.
It is possible to de-activate the function
at any time by pressing key D until the
corresponding icon will flash and then
key E.
.
8