Circuit Diagram For Camera/Transmitter; Testing The System - Westfalia RVC7000 Bedienungsanleitung

Circuit Diagram for Camera/Transmitter

Testing the System

1. Reattach the vehicle's negative battery cable.
2. Turn the ignition key to the accessory position, do not start
the engine.
3. Engage the parking brake, and shift to reverse position.
4. Look at the monitor. If the image does not match your rear
view mirror, press the menu button (10) on the monitor and
setup the image orientation at the menu item DIRECTION.
5. After testing the unit and checking the correct and secure run
of the wiring, permanently install the camera. Fully tighten the
license plate bolts. Use supplied cable ties to neatly gather
any excess wire.
Camera Installation
26