Adjust Image Orientation; Av Mode - Westfalia RVC7000 Bedienungsanleitung

Press the – button (12) to decrease a value of the selected menu
item. This way you can adjust brightness, contrast and colour
settings of the monitor to the desired level. Values between 0 and
100 can be entered.

Adjust Image Orientation

Press the menu button several times until the menu line
DIRECTION is marked. Press the + button (11) to modify the
image orientation. The unit has 4 different image orientation
setups:
1. Normal orientation
2. Mirrored orientation
3. Upside down orientation
4. Upside down + mirrored orientation
The different views allow you to mount the camera and/or the
monitor either right side up or upside down. The video image of
the rear view backup camera will always be displayed in proper
orientation so it matches the image that you will see in your rear
view mirror.

AV Mode

Press the menu button (10) as many times until the menu line
BACK UP is marked. Press the + button (11) to switch between
the settings AUTO and MANUAL.
In AUTO mode the monitor automatically switches from the AV
device to the rear view backup camera as soon as the vehicle is
in reverse gear.
In MANUAL mode you can select the video source manually that
is to be displayed on the monitor. If you press the AV button (14)
the monitor switches between the video images of the rear view
camera and the video images of the connected external video
device.
Using
22