Before First Use; Before Installing; Monitor Installation At The Dashboard - Westfalia RVC7000 Bedienungsanleitung

Before first Use

Dispose of packaging material or store it out of reach of children.
There is risk of suffocation for small children!

Before Installing

Before you permanently install the reversing video system to your
car check all parts for proper functionality.
If you are not confident working with 12 volt DC vehicle wiring,
removing and reinstalling interior panels, carpeting, dashboards
or other components of your vehicle, contact the vehicle's
manufacturer, or consider having the camera system profession-
ally installed.

Monitor Installation at the Dashboard

Choose a location at the dashboard where you want to install
the monitor.
Route the power cable of the monitor to the vehicle's cigarette
lighter.
When choosing a location for mounting the monitor and the
power cable, make sure the functionality of the airbags is not
affected, your vision is not obstructed, and there must be no
restriction to the safe handling of the vehicle.
1. Clean the dashboard surface well before mounting the
monitor.
2. Position the monitor stand (1) at the chosen position at the
dashboard surface.
3. Remove the first layer of protective film from the double sided
tape and stick it to the bottom of the stand.
4. Remove the second layer of protective film and press the
stand firmly for a few seconds against the dashboard surface.
Using
18