Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Package contents (Fig. A)
1 x loft bed, disassembled (1–20)
1 x assembly materials (A–Q)
1 x assembly instructions
Technical data
Loft bed dimensions:
approx. 98 x 113 x 208cm (D x H x W)
Suitable for slatted frames:
Min. size: 89 x 194cm (D x W)
Max. size: 90 x 196.5cm (D x W)
Maximum load: 100kg
Date of manufacture (month/year):
08/2019
Tested according to DIN EN 747-1:2015-08
Tested according to DIN EN 747-2:2015-08
Intended use
The product is designed for children 6 years and
up for indoor use. The product is not intended for
commercial use.
Safety information
Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of suffoca-
tion.
Risk of injury!
• Due to the risk of injury from falling off, the
product is not suitable for children under
6 years of age.
• Make sure the product is properly stabilised
before use.
• Place the product on a level surface.
• Children may get stuck between the product
and the wall, adjacent furniture, etc. In order
to avoid serious risk of injury, the distance
between the upper edge of the fall protection
and the adjacent structure must not exceed
7.5cm, or must be greater than 23cm.
• When used improperly, loft beds can pose a
serious risk of injury by strangulation. Objects
not intended for use with the product should
never be attached to or hung from a part of
the product. This includes, but is not limited to,
rope, cords, twine, hooks, belts and bags.
• The product is not a toy or a climbing appa-
ratus! Ensure that persons, especially children,
do not pull themselves up on the product or
stand on it.
• The distance between the upper edge of the
fall protections and the upper side of the base
of the bed must be at least 26cm.
• Climbing in from the outside should not be
permitted.
• The distance between the upper edge of
the fall protections and the upper side of the
mattress must be at least 16cm.
The marking line on the product must never be
exceeded (Fig. G).
• Use a slatted frame (not included in the pack-
age contents) with a width of min. 89cm and
max. 90cm, and a length min. 194cm and
max. 196.5cm.
• The slatted frame must be fastened. Use
suitable mounting materials for the respective
slatted frame.
• Check the product for damage or wear before
each use. Check regularly to make sure all
screws are tight! The product should only be
used if it is in perfect condition!
• Ensure that the product has been assembled
properly and in accordance with these assem-
bly instructions. Improper assembly can lead
to injuries and impair the product's safety and
functionality.
• Make sure the wall is suitable for mounting the
product. Unsuitable wall surfaces can lead to
injuries.
Preventing damage to the item!
• Ensure sufficient ventilation in the room in
order to keep the humidity low and to prevent
mould build-up in and around the product.
Assembly
The product should be assembled by
two people.
To assemble the product you will need the
supplied Allen key (E), a Phillips screwdriver and
a slot screwdriver (not included in the package
contents).
1. Put the product on a soft, flat surface. (Warn-
ing: hard surfaces can scratch the product!)
2. Assemble the product as shown in Figures B–I.
Note: the steps can be mounted on the right or
left side (Fig. D).
3. Place the product on a level surface (Fig. G).
4. Fasten the curtains (12, 16) to the product
with the Velcro fastener (Fig. I).
5. For proper stability, fasten the product onto
your wall with the bracket (Q) and suitable
mounting materials (not included in the
package contents) (Fig. G).
Note: enquire with your local dealer about the
correct mounting materials (dowels and screws)
for your masonry.
Storage, cleaning
When not in use, always store the product clean
and dry at room temperature.
Wipe clean with a dry cloth only.
IMPORTANT! Never clean the product with
harsh cleaning agents.
Curtains:
Tunnel:
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the pack-
aging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally friendly
manner.
The recycling code is used to identify
various materials for recycling.
The code consists of the recycling symbol
– which is meant to reflect the recycling cycle –
and a number which identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory guar-
antees or through goodwill do not extend the
warranty period. This also applies to replaced
and repaired parts. Repairs after the warranty
are subject to a charge.
IAN: 323665_1901
Service Great Britain
Tel.:
0800 404 7657
E-Mail: deltasport@lidl.co.uk
GB
15
Werbung
Inhaltsverzeichnis
