Ravcore TEMPEST AVAGO 9800 Bedienungsanleitung Seite 8

EN
SETTING GUIDANCE
1. Connect this gaming mouse with your computer by USB port.
2. Download a sofware & product drivers from
www.ravcore.com/en/download
3. After completing the installation, restart your computer.
4. Get into the software interface of RAVCORE TEMPEST (as below),
and you can start to set the mouse function.
TIPS
Please make sure the gaming mouse has already been connected to
your computer before and after installing the software.
SETTING GUIDANCE
IMPORTANT:
mouse function
1. Light Setting
a. Light Effect Switch: The mouse will light or not by choosing
"On" or "Off"
b. Light Effect Type Option: The mouse will light all the time by
choosing "Full lightened", or will be breathing light.
.
Please choose the profile before you set the
2. Sensitivity
6 Grade DPI shift designed for the mouse, each DPI can be set
from 200 up to 8200. Selected pane shows the DPI grade
is open, otherwise is closed.
3. System Setting
You can adjust the mouse parameter.
4. Advanced Setting
You can adjust the Polling Rate and On-To-Go Speed of the
mouse.
By clicking "Reset", you can make the advanced setting to be
factory default.
8