Before Use - Parkside HG05659 Bedienungs- Und Sicherheitshinweise

Not for use with corrosive
substances!
Do not spray on electrical
devices, electrical cables
or wires.
Do not spray into open
flames or onto heating
sources.
Do not spray on people!
Do not spray on animals!
Spray on plants only!
Do not use the product
for drinks!
Do not leave the pressure
spraying device standing in
the sun. There is a risk of ex-
plosion!
Keep away from naked flames
and heat sources. Seal con-
tainers securely. Store in a fire-
proof way! Do not use easily
flammable fluids!
Protect from frost and store
away from frost.
Adjustable from mist spray
to solid jet.
Store at 0 °C–40 °C in a
dry, dust-free location.
When pumping, always
watch the manometer to
check the operating pressure.
Wear suitable protective
coating, glove or mask.
Before using for the first time,
pls read the instruction care-
fully.

Before use

CAUTION! Check that the device is
functioning properly! Check the pres-
sure sprayer before each use to ensure
that it is free of visible damage and is
functioning safely. To do this, carry out
the following tests and inspections:
Check the tank , the suction hose
5
and the carry strap
6
Check that the hose connections are fitted
tightly.
Check that the pipe connections are fitted
tightly.
Pump the empty pressure sprayer to
approx. 1 bar.
The pressure must not fall more than ap-
prox. 0.5 bar in a space of 30 minutes.
Pump the pressure sprayer to approx.
2 bar.
12
for visible damage.
GB/IE 15