Samsung dvd hd870 Bedienungsanleitung Seite 7

Rear Panel
1
1. SCART JACK
- Connect to a TV scart input jack
2. DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to con-
nect to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to con-
nect to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
3. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P
- If P-SCAN Video Output is selected in Setup Menu,
progressive scan mode will work.
- If I-SCAN Video Output is selected in Setup Menu,
interlaced scan mode will work.
4. AUDIO OUT JACKS
- Connect to the Audio input jacks of your television or
audio/video receiver.
5. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack
on your television.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in
the TV's menu system.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conver-
sion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible
with the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 27 ~ 29 to get more information on how to use the setup menu.
2
2 4
- The Video Output in Setup Menu must be set to S-
6. S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the S-
- The Video Output in Setup Menu must be set to S-
7. HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
, P and Y video.
R B
- If an HDMI cable is connected to an HDMI-compati-
- If you want to use a Video, S-Video or Component
3
5 6
Video.
Video jack on your television for higher picture quality.
Video.
jack on your television for the best quality picture.
ble TV, HDMI will be output automatically within 10
seconds.
Output, unplug HDMI cable.
7
7