Important Safety Instructions; Connecting To Power Source - OK. OPD 200 Gebrauchsanweisung

en

IMPortant saFety InstructIons.

reaD careFully anD keeP For Future reFerence.
this label on the product informs the user that this is a
class 1 laser product containing a laser component.
Do not touch the lens inside the disc compartment.
cautIon! Use of controls or adjustments of proce-
dures other than those specified herein may result in
hazardous radiation exposure.
DanGer! Invisible laser radiation when open
and safety interlock failed or defeated. Avoid
direct exposure to the beam. Do not touch the
lens.
basIc connectIon
connectInG to tV
1. Use Scart cable (not included) to connect Scart
output to Scart input of a tV.
2. Use A/V cable to connect video output (yellow) and
audio outputs (red/white) to respective inputs of tV.

connectInG to Power source

Plug in the appliance. the power indicator
turns red with the unit being in standby
mode.
34
the lightning flash with arrowhead within an
equilateral triangle is intended to alert the user
to the presence of uninsulated "dangerous volt-
age" inside the enclosure of this appliance, which may
be of sufficient magnitude to constitute a risk of electric
shock to persons and animals.
the exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte-
nance instructions in the literature accompanying this
appliance.
connectInG to aMPlIFIer anD tV
1. Connect video output (yellow) to video input of tV.
Use coaxial cable (not included) to connect COAxIAl
output to coaxial type digital audio input of amplifier.