Settings Menu; Frequently Asked Questions - Byron DIC-24712 Bedienungsanleitung

Instruction manual
No: Button: Description
3 Door lock Opens the door lock
4 Gate Opens the gate
opener
5 Settings This menu contains settings for:
• Brightness
• Color saturation
• Contrast
• Volume
• Doorbell melodies
• Door lock time
6 Close Turns the monitor in stand-by mode
Table 1: Buttons and functions
5

Settings menu

Touch the settings icon on the home screen to enter the settings
menu.
Use the arrows to adjust the settings.
No: Button: Description
1 Brightness Use to adjust the brightness of the screen
2 Contrast Use to adjust the contrast on the screen
3 Color Use to adjust the colors
4 Volume Use to adjust the volume of the ring tone
5 Set ring Use to change ring tone
tone
8
6 Door lock Use to set the door lock to close after 1 or 4
seconds
7 Exit Use to exit the settings menu
6

Frequently asked questions

Problem
• The indoor unit does not
switch on.
• The ring tone volume is too
low.
• I connected the indoor unit to
a lock but it does not work.
• I hear interference on the line. •
Solution
• Make sure that the monitor is
connected to the power
source.
• Make sure the adapter plug is
properly pushed in to the
power outlet.
• Perhaps you extended the
cable. Extending the cable
can reduce the volume due to
being too long or too thin.
• Check if the lock is connected
properly and that a suitable
lock with an external power
source is used.
Move other electronics away
from the unit to minimize
interference.
• Perhaps the cable is too long
or the wire too thin.