Bartscher 350 / 130130 Original-Gebrauchsanleitung Seite 53

metal plates, brushes or polishing discs from other materials or alloys (e.g.
common grade steel, aluminium, brass, etc.) or tools used previously for cleaning
of other metals or alloys;
petrol, solvents or flammable and/or corrosive fluids;
silver cleaning agents.
Cleaning of the device
o Before cleaning and during cleaning, never touch moving parts of the device without
making sure that they stopped and the device is disconnected from the power supply.
o To avoid electric shock, never immerse the device, power cord or plug in water or
other liquids.
o Never place or put away the device directly to the sink or under the tap. Always make
sure no water gets inside the device.
o The device must be cleaned after each shift, before the daily use, or more frequently
when required.
WARNING
Dismount all the equipment from the device body before
cleaning.
o When dismounting the equipment follow the instructions presented in Chapter 5.1
„Start-up " (Assembly/Disassembly).
o All surfaces and parts of the device having contact with food, or areas of contact
with food (external and internal surfaces of tools) and and the spray areas (upper
surface of equipment fixed to the device and external surface of the device) must be
cleaned regularly as desribed below and then disinfected.
o Remove possible food residues from the equipment (e.g. using plastic scraper).
WARNING! Risk of incised wounds!
The knife of beater is very sharp and may cause injuries!
Never touch the beater knife with bare hands!
Always use cut resistant gloves during cleaning!
- 49 -