Description Of The Symbols - Ayce NC900BS Gebrauchsanweisung

DESCRIPTION OF THE SYMBOLS

1. Safety symbols
The use of symbols in this manual is intended to draw your attention to possible risks.
The safety symbols and the explanations that accompany them must be perfectly
understood. The warnings in themselves do not remove the risks and cannot replace
correct actions for preventing accidents.
This symbol, marking a point of safety, indicates a caution,
!
warning or danger. Ignoring this warning can result in an
accident to yourself or others. To limit the risks of injury,
WARNING
fire or electrocution, always follow the recommendations
indicated.
Before any use, refer to the corresponding section in this user
manual.
These symbols indicates the requirement of wearing ear
protection, eye protection, respirator and gloves when using
the product.
Conform to CE safety standards.
Class II symbol: this machine is designed with double
insulation. It is not necessary to connect it to an earthed
power socket.
180615_ayce_NC900BS_IM
Recycle unwanted materials instead of disposing of them. All
appliances and packaging should be sorted and tendered at a
regional recycling centre into to be processed in an ecological
manner.
Proven safety of the federal inspectorate for heavy current
installations ESTI.
2. Symboles
Les symboles suivants sont utilisés dans ce manuel d'utilisation et/ou sur l'outil,ils
fournissent d'importantes informations concernant l'outil ou d'importantes
instructions concernant son utilisation.
900W
Rated output
900W
230-240 V~50 Hz
230-240 V~
50Hz
120-400/min
min
-1
Rotational speed
120-400
80 81 |
76X533mm
sanding paper
76 x 533mm
With a dust extraction
bag to suction the dust
3m cable with Swiss
plug
3M
180615_ayce_NC900BS_IM
GB
GB