Product Presentation; Technical Specifications And Features; Installation - Shott JET LIGHT Benutzerhandbuch

E N
c. was repaired with non-original parts. Should the product compliance defect be consequent to incorrect installation or
start-up procedures, this warranty only applies when this installation or start-up procedure is included in the product
sales contract and performed by the dealer or his authorised personnel.
2.2. Returns.
In the event of defects, faults and malfunctions, the product must be returned to the deal with the completed claim report, where
applicable.
2.3. General and safety warnings.
General warnings.
2.3.1.
SHOTT International srl continuously strives to improve its products. We trust the user will understand the technical
modifications SHOTT International srl reserves the right.
SHOTT International srl is not liable for any damages due to improper product use.
Carefully read and keep the user manual.
In order to increase energy savings, only use the product when necessary.
The following paragraphs include all the instructions necessary to best use the product according to your needs and to
independently perform the cleaning and maintenance operations that this type of product requires. The references (#) in
parentheses correspond to the parts indicated in the diagram (see Fig. 3).
Upon product receipt and/or purchase, check packaging integrity. The product must be accompanied by the user manual.
The user manual must be complete.
In the event of malfunctions, consult the user manual and, if necessary, contact specialised technicians.
Failure to observe the instructions in this user manual immediately null and voids the warranty.
Follow carefully what is reported next so that you will use the product respecting the most common safety rules and
remember that it is necessary to have a proper pool pump to be able to use the product.
Respect current regulations regarding accident prevention.
Due to the complex nature of the cases treated, the installation, user and maintenance instructions contained in this
customer manual do not seek to examine all possible and imaginable cases of service and maintenance. Should your require
additional instruction or have specific problems, please do not hesitate to contact the distributor or the product manufacturer
directly.
Safety warnings.
2.3.2.
The product is not suited for people (even children) who suffer from physical, sensorial or mental handicaps or people who do
not have sufficient experience or training unless instructed on product use and assisted by a person in charge of their safety.
Supervise children to ensure they do not play with the product.
Be sure to disconnect the power plug from the power outlet before operating on the product.
Be sure to disconnect the power plug from the power outlet (pump) before operating on the product.
Attention to the inlet/outlet points because they can trap parts of the body and/or hair and cause serious personal injuries and
even death (Fig. 5).
Pumps, filters, and other equipment/components of a pool filtration system can operate under pressure. If not correctly
installed they can cause serious personal injuries and even death (Fig. 6).
Do not connect the product to the pump inlet (Fig. 7, Fig. 8).
Packaging materials are not children's toys. Films can be hazardous and cause suffocation.
The power cord cannot be replaced. If the power cord is damaged the appliance should be scrapped.

3. Product presentation.

3.1. Product scope.
The product function (nozzles) is facilitating the movement of the water inside the pool.
3.2. Composition.
See Fig. 3.

4. Technical specifications and features.

See Tab. 1 in Fig. 1.
The hydraulic parts used for the building of the system which shall include the product modify the performance of the
product.

5. Installation.

5.1. Necessary tools.
See Fig. 4.
5.2. Storage features and conditions.
Store the product in a dry place and keep away from the elements.
5.3. Transport.
The product is delivered suitably protected against transport damages. However, handle with care to avoid damages.
5.4. Handling.
Handle the product with care to avoid damages.
5.5. Positioning.
See Tab. 1 with reference to Fig. 9.
The transformer is always kept at a minimum distance of 3.5 [m] from the edge of the swimming pool.
Considering the following aspects is recommended:
Nome file:
Istruzioni Jet Light
File name:
12-28
Rev. 0 04/04/2013