Internal Recording; Recording A Single Track; Recording An Entire Cd - Philips FW-R55 Bedienungsanleitung

For internal recordings you can record from the internal
CD changer or tuner.

Recording a single track

Recording a single track during playback
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Play your desired track on the CD changer.
3
Press RECORD on the set to enter the recording menu.
REC TR and the tracknumber are displayed.
4
Press either:
YES to start recording,
The arrow lights,
RECORDING IN SESSION
playback and recording start from the beginning of the
selected track and the actual recording time left starts to
count down.
or
NO to continue playback.

Recording an entire CD

High speed recording and automatic finalizing of
the current disc
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Press either CD1, CD2 or CD3 to select the disc you wish
to copy.
is shown,
3
Press COPY CD on the set to enter the recording menu.
The arrow starts blinking.The remaining recording time
of the CDR(W), the total playing time of the source CD
and RECORD CD1 (or 2, 3)? are displayed.
4
Press YES to start recording and finalizing.
The arrow lights,
speed recording at a low volume and finalizing start and
the actual recording time left starts to count down.
Note: If a program was already available before pressing
COPY CD, this will be ignored.
disc will be recorded. After finishing the recording,
shown and the program is available again.

Internal recording

DISP LAY / RDS
RECORDING IN SESSION
goes off and the current
PROG
ON • OFF LEVEL
AUX
is shown, high
is
PROG
19