Connecting The Power; Making Settings On The Settings Panel Screen - Tascam US-2x2 Bedienungsanleitung

Connecting the power

US-4x4
Use the included 12V AC adapter (GPE248-120200-Z)
to connect a power supply to the unit as shown
below.
The AC adapter for the US-4x4 includes two types of
outlet plugs. Attach the type of plug that matches the
power outlet that you are using. Please see "Changing
the outlet plug" in the Reference Manual for instruc-
tions about how to do this.
Power outlet
GPE248-120200-Z (included)
US-2x2
Normally, when a US-2x2 is connected to a computer,
it will operate using USB bus power, so a separate
power supply is not necessary. However, when using
the unit connected to an iOS device, a separate AC
adapter designed for use with this unit (TASCAM
PS-P520, DC5 V) is necessary. In this case, connect the
power source to the unit as shown below.
TASCAM
PS-P520 (sold separately)
CAUTION
Always use the AC adapter designed for use
with the unit: GPE248-120200-Z for the US-4x4
or TASCAM PS-P520 for the US-2x2. Using a
different AC adapter could cause malfunction,
overheating, fire or other problems.
10
TASCAM US-2x2/US-4x4
DC plug
Power outlet
DC plug
Making settings on the Settings
Panel screen
8 Windows
From "All Apps" (All Programs), select "TASCAM US-2x2
& US-4x4 Settings Panel" under TASCAM.
8 Mac OS X
Select "TASCAM US-2x2 & US-4x4 Settings Panel" from
the Applications folder and launch it to open the
mixer panel on the computer display.
1
2
Windows Settings Panel screen
1
2
Mac Settings Panel screen
1 Direct Monitor Settings Input 1-2
Set the monitoring signal for the IN1/IN2 jacks to
Mono or Stereo.
2 Direct Monitor Settings Input 3-4 (US-4x4
only)
Set the monitoring signal for the IN3/IN4 jacks to
Mono or Stereo.
3 Audio Input On/Off
Turn input on/off for each channel separately.
4 Line Outputs 1-2
Select the signals to be output from the LINE OUT
(BALANCED) 1/2 and PHONES jacks.
Options
Monitor: The signals input from all the input
connectors and the signals sent from the computer
by USB are mixed by the mixer and output.
Computer 1-2: Only the signals sent from the
computer by USB are output.
5 Line Outputs 3-4 (US-4x4 only)
Select the signals to be output from the LINE OUT
(BALANCED) 3/4.
Options
Monitor: The signals input from all the input
connectors and the signals sent from the computer
by USB are mixed by the mixer and output.
3
4
5
3
4
5