Installation And Removal Of Micro Sd Card - Manta Blackbox FullHD MM335 Bedienungsanleitung

Methods to Charge Battery:
Full Middle Low
1. Connect DVR to car charger through Mini-USB port, DVR powers on
automatically to enter standby mode and start charging with green
indicator light ON..
Once DVR been fully charged, green indicator light goes out.
2. Connect DVR to computer via USB cable, DVR power on automatically
to enter mode choice between 'Mass Storage (MSDC)' and 'PC-Cam', press
'UP'/'DOWN' to choose the desired mode and 'REC/OK' button to enter
your DVR and start charging.
Once DVR been fully charged, green indicator light goes out.
NOTE:
During charging, it's permitted to turn off the DVR manually.

Installation and Removal of Micro SD card

1. In the direction as indicated, insert the Micro SD card into
the slot until it is held firmly
2.To take the Micro SD card out, slightly press the
Micro SD card to eject it out.
NOTE:
• Observe the direction to insert the Micro SD card; if the direction is
reverse,
the DVR and the Micro SD card may be damaged.
• When the Micro SD card is inserted into the DVR, the machine will set
the Micro SD card as preset storage unit and the data in the original Micro
SD card will be unreadable.
5