US Blaster USB 7324 Bedienungsanleitung Seite 5

3. INPUT TOGGLE SWITCH
Selects which source will be live to that channel bassed on what you have conntected to the rear
panel input section.In CD1-2 position the internal CD units are active
4. CUE FOR CH1-2
Selects which source will be live to that channel for CH1 &CH2
5. CH1&CH2 GAIN CONTROL
Adjusts CH1&CH2 level
6. CUE LEVEL CONTROL
Adjusts cue volume
7. DJ MIC
Adjust microphone level
8. HIGH FADER 1-2
Adjust CH1&CH2 equalization of high
9. MID FADER 1-2
Adjust CH1&CH2 equalization of mid
10. LOW FADER 1-2
Adjust CH1&CH2 equalization of low
11. FADER START
Activation allows you to start the CD players from you crossfader.Travel from left to right will start
the right CD player and pause the left CD player.
12. MASTER LEVEL
Adjust master level output.
13. REPLACEABLE CROSSFADER
Achieves clean segues between the two input channels.Hard left selects channel 1."Hard
right"selects channel 2.with the crossfader centered,both assigned channels are live Use the
crossfader for fast and seamless segues from one selected channel to the other.
Connection:
1. AC CORD
Used this cable to connect the AC mains power to the unit
2. POWER BUTTON
Press the power switch to turn the unit on. To switch the POWER off press the POWER switch
again.
5