US Blaster USB 7004 Bedienungsanleitung

US BLASTER USB 7004
Our USB 7004 has 3 channels (A, B and C) of which each includes a
without any fader. This last channel enables a microphone to be used; the microphone
volume level can be set using the
flexibly operating (100 mm) ALPS faders, which are mounted so that any dirt is
prevented from entering them and, therefore, a long-term trouble-free operation is
ensured. The 3 channels have 2 inputs to connect, besides turntables,
to the button situated next the channel input control, switching from Input 1 to Input 2
is easy because switching the plugs is eliminated.
Extra attention is paid to tone adjustment: perfect trebles including their boosting,
middle tone presence and beautiful basses. In addition, 3
tone and/or treble to be removed from
on 2 external faders
those from the other.
Pre-listening operates on both channels and uses an outstanding amplifier, which is
equipped with a switch to reproduce pre-listening and
The balanced master output
prevents undesirable cracking noise (plops) from occurring so that your sound system is
protected in an optimum manner.
In addition to the master
nd
and 2 Phones output.
Specifications
Channel separation
Output noice
Phono input
Signal level
Impedance
Line input
Signal level
Impedance
Microphone input
Output
Master XLR
Master XLR
Master XLR
Subwoofer
Headset
Power Supply
Operating instructions
----------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------
------------------
gain
and Transform switches add music fragments from one channel to
is fitted with
output, the USB 7004 includes a
> 65 dB at 1 kHz
> 80 dB
-41 dB at 47 kOhm (variable)
47 kOhm/ 25 pf nom.
-14 db at 600 Ohm variable
22 kOhm nominal
-54 dB / 600 ohm
+6 dB balanced / 600 ohm /variable
0 dB balanced / 600 ohm /var.
0 dB balanced / 600 ohm /var.
0 dB unbalanced / 600 Ohm /125 Hz
0.3 Watt at 4 Ohm /
220-240 Volt 50 Hz – 25 Watt
control. You will surely appreciate the long,
X-fader within a second. The X-
master
chassis XLR connectors and the built-in relay
imp. 4 ..32 ohm
fader and 1 channel
line signals. Due
killers enable bass, middle
fader
signal at the same time.
Sub output, Monitor output
operates