Countdown Function - Concept MT5417 Bedienungsanleitung

WARNING!
If you remove the food before the preset time expires, or you aren't using the oven, always reset the current program.
Defrost function
1. Place the food in the oven and close the door.
2. Activate the defrost function by pushing the Weight Defrost button.
3. Set the approximate weight of the food by turning the Time/Menu button.
4. You will turn the unit on by pushing the Time/Menu button.
5. At about midway through the set time, the program will stop and you will hear a beeping sound. Turn the food and
resume defrosting by pushing Time/Menu button.
6. After the defrosting stops, the unit will turn off.
7. Open the door and remove the food.

COUNTDOWN FUNCTION

This function includes a countdown of the preset time, and you will hear a beeping sound at the end. This function is
used without food.1. Stiskněte tlačítko Timer.
1. Push the Timer button.
2. Set the time by turning the Time/Menu button.
3. The countdown will start by pushing the Time/Menu button.
4. The display will switch to time after a while. To display the countdown time, push the Timer button.
5. After the countdown is finished, you will hear a beeping sound.
Delayed ON function
1. Select the required heating or defrost program, and set the power and time, or weight of the food.
2. Push the Preset button.
3. Set the required hour of starting the program by turning the Time/Menu button.
4. Push the Preset button.
5. Set the required minute of starting the program by turning the Time/Menu button.
6. The countdown will start by pushing the Time/Menu button.
Note: Before you start a program, always make sure there is food in the oven.
Multistage cooking function
Cooking certain types of food requires several stages (e.g. long, moderate cooking with a short, intensive finish).
a) 2 Cooking stages
1. Place the food in the oven and close the door.
2. Set the required power, 0 - 100% by repeatedly pushing the Power button.
3. Set the heating time by turning the Time/Menu button.
4. Select cooking stage 2 by pushing the Multistage cooking button (2S will be displayed).
5. Set the required power, 0 - 100% by repeatedly pushing the Power button.
6. Set the heating time by turning the Time/Menu button.
7. After pushing the Time/Menu button, the unit will start the first stage (1S); after this stage ends, the second stage
will begin automatically (2S).
8. If you need to interrupt the heating, e.g. to mix the food, push the Stop/Cancel button and open the door. After you
close the door, push the Time/Menu button again, and the heating will resume.
Note: If you open the door during operation, the heating will stop automatically. After you close the door, the
heating will resume.
9. If you need to stop the current program before the preset time expires, push the Stop/Cancel button. By pushing
the button again, you will reset the program and the time will be displayed.
60
EN
MT5417