Description Of The Control Panel; Installation - Concept MT5417 Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

DESCRIPTION OF THE CONTROL PANEL

1. Display

2. Power selection button

3. Multi-stage cooking button

4. Preset program selection button

5. Weight adjustment button

6. Weight defrost button

7. Timer button

8. Time setting button

9. Stop/Cancel button

10. Time/Menu button

OPERATING INSTRUCTIONS

1. Remove all the packaging and marketing materials from the unit before the first use. Do not remove the plastic foil

on the inner side of the door.

2. Check the appliance and power cord for damage regularly. Do not switch on a damaged unit. There can be none

of the following: door askew or damaged, door sealing damaged, broken or damaged hinges or damaged safety

closing system.

3. Place the unit only on a stable and heat-resistant surface, out of the reach of other heat sources. This surface shall

have sufficient load capacity to hold the unit with its contents.

4. Keep a safe distance of the unit from other appliances; 10 cm on the sides and back, and 20 cm above the unit at

minimum. Make sure there is a safe distance between the unit and flammable materials, such as furniture, curtains,

lace, blankets, paper, clothing etc.

5. Do not switch the unit on without a properly mounted rolling wheel and rotating glass tray.

6. The supply cable plug has to be easily accessible so that it can be disconnected quickly, if need be.

NOTE

Prior to using a new unit, wipe the surface and the inside with a wet cloth for hygienic reasons. Wash all the removable

parts in warm water with a detergent.

WARNING!

Open the door slowly and carefully. When opening the door during operation, or after preparation, a large volume of

steam is released, and condensed hot water may drip from the door's lower edge. There is a risk of scalding.

Microwave oven heating principles

Place the food evenly. Place thicker sections at the edges.

MT5417

Inhaltsverzeichnis