Herunterladen Inhalt Inhalt Diese Seite drucken

Doepke Dupline DSM 4R Bedienungsanleitung

4-fach relaisausgabe mit rückmeldung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Doepke
4-fach Relaisausgabe DSM 4R

Inhaltsverzeichnis

1. Allgemeines.............................. 2
2. Kodierung................................. 2
3. Inbetriebnahme ........................ 2
4. Anzeigen .................................. 3
5. Technische Daten .................... 3
6. Garantie ................................... 4
Diagram.................................... 8
Dupline
mit Rückmeldung
4-way Relay Output DSM 4R
with Acknowledgement Feature
Bedienungsanleitung
Operating Instructions
Table of Contents
7. General Information ................. 5
8. Coding ...................................... 5
9. Putting into Service .................. 5
10. Indicators.................................. 6
11. Technical Data ......................... 6
12. Guarantee ................................ 7
13. Anschlussschema / Connection
Diagram.................................... 8
3931181/02/05/D

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Doepke Dupline DSM 4R

  • Seite 1: Inhaltsverzeichnis

    Doepke Dupline 4-fach Relaisausgabe DSM 4R mit Rückmeldung 4-way Relay Output DSM 4R with Acknowledgement Feature Bedienungsanleitung Operating Instructions Inhaltsverzeichnis Table of Contents 1. Allgemeines......2 7. General Information ....5 2. Kodierung......... 2 8. Coding ........5 3. Inbetriebnahme ......2 9.
  • Seite 2: Allgemeines

    Doepke Bedienungsanleitung Dupline 4-fach Relaisausgabe DSM 4R 1. Allgemeines Das DSM 4R ist eine Komponente des Dupline-Installationssystems und ermöglicht das Schalten von vier unabhängigen Verbrauchern, die auf verschiedene Phasen aufgeteilt sein dürfen. Jeder Verbraucher darf dabei eine Stromaufnahme von bis zu 16 A aufwei- sen.
  • Seite 3: Anzeigen

    Doepke gen zum Erdpotenzial führen zu Störungen und sind nicht zulässig. Auf die richtige Polarität der Versorgungsspannung und des Dupline-Signals ist zu ach- ten. Folgende Tabelle zeigt die Anschlussbelegung: Klemme Beschreibung Klemme Beschreibung 1.1/1.5 Schaltkanal 1 (L 1.2/1.6 Rückmeldeeingang 1 (N) 2.1/2.5...
  • Seite 4: Garantie

    Doepke Min. Typ. Max. Glühlampen 3000 W HV-Halogenlampen 2500 W Leuchtstofflampen 2400 W Leuchtstofflampen mit EVG 600 W Gasentladungslampen max. 1000 W (70 µF), 1250 W (100 µF Kondensator zur Kompensation max. 70 µF, (100 µF Energiesparleuchten mit KVG 1250 W...
  • Seite 5: General Information

    Doepke Operating Instructions Dupline 4-way Relay Output DSM 4R 7. General Information The DSM 4R is a component of the Dupline installation system. It permits the switching of four independent loads, which may be operated on different phases. Each load can have a current consumption of up to 16 A.
  • Seite 6: Indicators

    Doepke Check that the polarity of the supply voltage and the Dupline signal are correct. Terminal Description Terminal Description 1.1/1.5 Switching ch. 1 (L 1.2/1.6 Acknowledge input 1 (N) 2.1/2.5 Switching ch. 2 (L 2.2/2.6 Acknowledge input 2 (N) 3.1/3.5 Switching ch.
  • Seite 7: Guarantee

    Doepke Min. Typ. Max. Incandescent lamps 3000 W HV-halogen lamps 2500 W Fluorescent lamps 2400 W Fluorescent lamps with el. ballast 600 W Gas discharge lamps max. 1000 W (70µF), 1250 W (100µF Capacitor for compensation max. 70 µF (100µF Energy-saving lamps, conv.
  • Seite 8: Anschlussschema / Connection Diagram

    Doepke 13. Anschlussschema / Connection Diagram L in L out L in L out L in L ou t L out L in Doepke BUS OK BUS OK DSM 4R DSM 4R Dupline Dupline + Dupline - +24V DC 0V DC...

Inhaltsverzeichnis