Care Of The Environment - THOMSON CP284DAB Bedienungsanleitung

Factory reset
You can reset your radio and restore all of the original factory settings.
Note: If you reset your radio all of your stored station presets will be deleted.
In DAB or FM mode:
1) Press and hold the Menu/Info button to enter the menu options.
2) Use the TUNE+/TUNE- BUTTON to scroll to '<System Settings >'. Press the SELECT/SCAN
button to select.
3) Use the TUNE+/TUNE- BUTTON to scroll to '<Factory reset>'. Press the SELECT/SCAN button
to select.
4) 'Factory Reset? <No> Yes' will be displayed. Use the TUNE+/TUNE- BUTTON to scroll to '<Yes>'.
Press the SELECT/SCAN button to select.
5) 'Restarting...' is displayed. After a few seconds the display will then go back to standby mode.
Time Projection Function
Step 1: Press the DISPLAY button on the side of the unit
Step 2: Press the REVERSE button or rotate the projection part to the proper angle position and adjust
the focus knob to make sure that the time image is clear.
(You can project the time image onto screens such as white walls or other surfaces to obtain
the best effect)
Adaptor specification:
Adaptor Input:
Output:
Frequency ranges:
Under the environment with electrostatic discharge, the device may be power off. (EUT could not
operate properly). It requires user reset the device by turn on the device to choose the appropriate
mode & set time again.

Care of the environment

Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
Attention should be drawn to environmental aspects of battery disposal.
220-240V~50/60Hz 15A MAX.
DC 5V 1A
FM: 88.8 – 108Mhz / DAB: 174 – 239MHz
- EN 9 -