Vitek VT-1467 GY Betriebsanweisung Seite 5

ENGLISH
• Close supervision is necessary when chil-
dren or disabled persons are near the oper-
ating unit.
•
This unit is not intended for usage by children
or disabled persons unless they are given all
the necessary and understandable instruc-
tions by a person who is responsible for their
safety on safety measures and information
about danger that can be caused by improper
usage of the unit.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE USING THE UNIT
Note: After unit transportation or storage at low
temperature it is necessary to keep it for at least
two hours at room temperature before switching
on.
• Wash the attachments that will contact food
with warm water and a neutral detergent and
dry them thoroughly before use.
•
Wipe the motor unit (4), whisk gear (6) and
processing bowl geared lid (10) with a soft
slightly damp cloth.
Attention!
Do not immerse the motor unit (4), whisk
–
gear (6), processing bowl geared lid (10),
power cord and power plug into water or any
other liquids.
Do not put the attachments and bowls in a
–
dish washing machine.
OPERATION TIME
Continuous operation time while working with
attachments (5, 7) should not exceed 1 minute.
Operation time of processor should not exceed
20-30 seconds. Make at least a two-minute
interval between operation cycles.
USING THE BLENDER ATTACHMENT
Warning:
Before assembling make sure that the power
–
plug is not inserted into the power socket.
• Insert the blender attachment (5) into the
motor unit (4), and turn it counterclockwise
until bumping.
•
Insert the power plug into the socket.
•
Immerse the blender attachment (5) into the
bowl with products that you want to chop/
VT-1467.indd 4
mix; you can use the measuring cup (21)
for it.
Note: When using the measuring cup (21)
for chopping/mixing products the amount
of ingredients should not exceed 200 ml.
Otherwise the mixed products can splash.
•
To switch the blender on press and hold the
button (2). Set the required operation speed
from 1 to 20 using the control knob (1). Use
this operation mode for mixing liquid prod-
ucts.
•
If you press and hold the button (3), the unit
will operate at maximum rotation speed. Use
this operation mode for combined process-
ing of liquid and hard products.
Note:
Food should be put into the bowl before
–
switching the unit on.
Before starting of chopping/mixing, we rec-
–
ommend to peel fruit, remove inedible parts,
such as stones, and cut fruit into 2х2 cm
cubes.
•
After you finish using the unit, take the power
plug out of the socket and remove the blend-
er attachment (5), turning it clockwise.
Attention!
Do not remove the blender-attachment (5)
–
during operation.
In order not to damage the blades, do not
–
process too hard products such as cereals,
rice, spices, coffee beans, ice, cheese, fro-
zen food.
– If the products are difficult to process add
some liquid into the bowl.
USING THE WHISK
Use the whisk attachment (7) only for beating
cream, making biscuit dough or mixing ready
desserts.
Warning:
Before assembling make sure that the power
–
plug is not inserted into the socket.
• Insert the whisk (7) into the gear (6).
• Insert the whisk gear (6) into the motor unit
(4), and turn it counterclockwise until bump-
ing.
•
Insert the power plug into the socket.
•
Sink the whisk (7) into the bowl with food.
•
Set the required operation speed from 1 to
20 using the control knob (1).
4
18.10.2012 15:06:31