Vitek VT-1467 GY Betriebsanweisung Seite 4

HAND BLENDER SET
Description
Rotation speed control knob
1.
ON button "I"
2.
Turbo mode button "II".
3.
Motor unit
4.
Blender attachment
5.
Whisk gear
6.
Whisk for beating/mixing of liquid products
7.
Pusher for cleaning of cubic grid
8.
Pusher
9.
Processing bowl geared lid
10.
Cubic attachment driving shaft
11.
Cubic attachment knife
12.
Cubic attachment with removable grid
13.
Clamps
14.
Cubic grid
15.
Lock button of processing bowl lid
16.
Processing bowl
17.
Processor chopping knife
18.
Processor driving shaft
19.
Measuring cup lid
20.
Measuring cup
21.
Safety measures
Before using the unit, read these instructions
carefully. Keep these instructions for future
reference.
Use the unit according to its intended purpose
only, as it is stated in this user manual.
Mishandling the unit can lead to its breakage
and cause harm to the user or damage to his/
her property.
• Before connecting the unit to the mains,
make sure that unit operating voltage corre-
sponds to your home mains voltage.
•
The blender set allows quick and effective
operation, but continuous operation time
should not exceed 1 minute while using blend-
er attachment, whisk, mash making attach-
ment and 20-30 seconds while chopping
products in the processor. Make at least a
two-minute interval between operation cycles.
• Cool down hot products when using the
blender attachment.
•
Do not use the unit outdoors.
•
Use only the accessories supplied.
•
Before using the unit for the first time wash
all the removable parts that will contact food
thoroughly.
VT-1467.indd 3
• Before using the unit make sure that all the
parts are set properly.
• Place the bowl on a flat, stable surface.
•
Products should be put into the bowl before
switching the unit on.
•
Do not overfill the chopper bowl with prod-
ucts and watch the level of poured liquids.
•
The blades of chopping knife are very sharp
and dangerous. Handle the knife very carefully!
• If rotation of the chopping knife is hindered,
unplug the unit and carefully remove prod-
ucts that prevent blade rotation.
•
Remove products and pour out liquids from
the chopper bowl only after complete stop
of the knife.
•
Do not touch the rotating parts of the unit. Do
not allow hair or clothes edges get into the
blades rotating zone of blender attachment.
• Do not leave the operating unit unattended.
•
Always unplug the unit before cleaning and
when you do not use it.
•
Do not use the unit near hot surfaces (such
as gas or electric stove, oven).
•
Provide that the power cord does not touch
sharp edges of furniture and hot surfaces.
• Do not pull the power cord and do not twist it.
• Do not touch the plug with wet hands.
•
Do not use the unit if the power cord is dam-
aged.
•
Do not try to repair the unit by yourself. If the
unit has damages, apply to the authorized
service center.
• To avoid risk of electric shock or fire, do not
immerse the unit, the power cord and the
power plug into water or other liquids. If the
unit was dropped into water:
do not touch water;
–
unplug the unit immediately, and only then
–
take it out of water;
– apply to the authorized service center for
testing or repairing the unit.
• For children safety reasons do not leave
polyethylene bags, used as a packaging,
unattended.
•
Attention! Do not allow children to play with
polyethylene bags or film. Danger of suf-
focation!
•
Do not allow children to use the unit as a toy.
3
ENGLISH
18.10.2012 15:06:31