Front Speaker - Kenwood KS-8200HT Bedienungsanleitung

On the Desktop or Shelf
Place the speakers on the desktop, shelf or a similar level surface.
÷
The round encircled numerals in the following text refer to the items listed on the "Included parts list" page.
÷
The supplied speaker wires are color-coded according to the speakers to be connected. See the description in "Connections"
for details.

7 Front speaker

Be sure to remove the plates (small) from the supplied speaker stands and attach the plates (small) to the front speakers.
1
Disassemble the pole assembly into the bottom plate and pole by removing the retaining screws.
2
Disassemble the bottom plate into the plate (small) and plate (large) by removing the retaining screws.
3
Using the screws removed in step
4
Remove the two screws from above and below the terminal on the rear of the speaker. Distribute the speaker wire through the
hole on holder A 2 and then connect it to the terminal on the speaker. Using the screws removed from the speaker, attach
holder A 2, together with the plate (small), to the speaker. Attach cushions 7 to the plate (small). The cushions prevent the
speaker from sliding, and dampen its vibrations.
1
Bottom plate
Screw
7 Center speaker, Surround speaker
Attach cushions to the center speaker and surround speakers as shown below. The cushions prevent the speaker from sliding, and
dampen its vibrations.
Center speaker
6
5
On the Wall
You can hang the front and surround speakers on the wall vertically, and the center speaker horizontally.
Preparation
To install the front speakers and center speaker on the wall, it
is first required to attach the supplied brackets on the rear of
the speaker.
Remove the two screws from each speaker and, using the
removed screws, attach two brackets to the rear of the speaker.
Check the top and bottom of each bracket and attach it cor-
rectly as shown.
The surround speakers have the wall-mount holes made on
the rear in advance.
6
EN
2
, attach only the plate (small) to holder A 2.
2 3
Screw Plate (small)
Plate (large)
6
5
4
2
Screw
Plate (small)
Surround speaker
5
Bracket
Screw
Installation Methods
Insert the speaker wire
here.
Screw
7
Bracket
Screw