Mounts With Adhesive Tape - GUARDO 360 Bedienungsanleitung

MOUNTS WITH ADHESIVE TAPE

How to apply the adhesive tape (IMPORTANT!)?
1. Apply the tape 24 hours before use in a room temperature around 21°C
2. Make sure the surface you want to apply the tape on is smooth: the tape will not
adhere properly on an embossed or porous surface.
3. Clean and dry the surface before application. Any cleaner that will not leave a film or
oily surface can be used!
4. Press the tape entirely and firmly into place!
How to remove the adhesive tape?
The adhesive tape can be removed by using a hairdryer: the heated air will loosen the
adhesive part. Remove the residue with a cleaner or with alcohol.
A. CURVED SURFACE MOUNT
Stick the 3M VHB tape to either one of the curved surface mounts (16 or 22) and place/
stick the mount on a curved surface.
Note: This mount can also be used with the remote control's strap!
8