Getting Started; Place Micro Sd Card; Turning On/Off - GUARDO 360 Bedienungsanleitung

PLACE MICRO SD CARD

Make sure a Micro SD card of
32 or 64 GB (preferably from
a known A-brand), Class 10
(UHS-I) with a minimum of 30
MB/s writing speed (optionally
available at www.guardo.be.) is
inserted into the Micro SD Card
slot (11) before you start using
the Guardo 360 Cam.
Make sure you format the Micro SD card before first use! You can format the micro SD card via:
• the App (see 'Full operation from Guardo 360 App)
• the camera's menu (see 'Menu & System Settings')
• your computer (see 'Connecting to a computer' to find out how)
Place the micro SD card into the Micro SD Card slot (11) and press gently with your finger
nail so that it clicks into place. (To remove the Micro SD-card: press the card gently again
with your finger nail so that it pops out).
Note:
• When there is no micro SD card inserted, the camera cannot be used!
• Make sure the capacity of your micro SD card does not exceed 64 GB, Class 10 (UHS-I).

TURNING ON/OFF

• To turn the Guardo 360 Cam ON: Press the Power/Mode Button (1) for 2/3 sec. to turn
the camera on. The LCD display (7) will turn ON and show "360 Wifi". The red indicator
(2) will flash and you will hear a short beep indicating that the camera is turned on.
• To turn the Guardo 360 Cam OFF: Press the Power/Mode Button (1) again for 2/3 sec.
to turn the camera off. The LCD display (7) will turn OFF.

GETTING STARTED

10