Charging The Battery - GUARDO 360 Bedienungsanleitung

CHARGING THE BATTERY

Note: Make sure the battery is fully charged before first use!
To charge the battery:
1. Make sure the Guardo 360 Cam is turned off.
2. Connect the micro USB cable (12) to the Micro USB Port (10) of the Guardo 360 Cam.
3. Connect the other end of the micro USB cable (12) to the USB port of your computer or
the optional Guardo USB home charging device with a 5V 1A (1000 mA) output power,
optionally available on www.guardo.be.
4. During charging, the blue Power / Charge indicator (2) will light continuously. When
charging is completed the blue LED indicator (2) will turn off.
Note:
• The camera can be used while charging.
• When the battery runs out of power, the Guardo Action 360 Cam will turn off but will
save the part that was recorded until the camera turned off.
• When the camera is ON but not in use it will automatically turn off after 5 min. This is
the default setting and can NOT be changed in the camera's menu.
• The delivered micro USB cable (12) offers fast and efficient charging but is also used
for synchronizing and data transfer with your PC.
• Extra charging devices/accessories can be ordered from our website: www.guardo.be.
• If the camera is not used for a long time, periodically recharge it to ensure battery
performance.
5