Change Mode; Default Settings - GUARDO 360 Bedienungsanleitung

Note: The Guardo 360 Cam will turn off automatically when it is not being used for 5
minutes. This is the default setting and can NOT be changed.

CHANGE MODE

The camera can be set into 2 different modes: video mode & photo mode.
After having turned on the camera, press the Power/Mode Button (1) to switch between
the different modes:
• Video mode: Record videos. The video camera icon
corner of the display. Video mode is selected by default when turning on the camera.
• Photo mode: Make photos. The photo camera icon
corner of the display.

DEFAULT SETTINGS

The Guardo 360 Cam can be set (resolution,
video mode, camera mode, ...) according to
the purpose for which it is used and according
to your own preferences! When the camera
is turned on for the 1st time, the following
information will appear on the LCD display, this
is the default setting:
CHANGE MENU SETTINGS & SYSTEM SETTINGS
The LCD display on top of the camera makes it able to control the camera.
Change menu settings
How? In video/photo mode:
• Long press the Wifi / Menu button (5) to open the menu.
• Use the Wifi button (5) to navigate through the menu.
• Press the Record / OK button (4) to open the submenu.
• Use the Wifi button (5) to navigate through the submenu.
• Press the Record / OK button (4) to select the desired setting.
• To close the menu, long press the Wifi / Menu button (5).
will be shown in the upper left
will be shown in the upper left
11