Accessories; Intended Use; Assembly And Operation - Worx WX801 Originalbetriebsanleitung

Maintain this tool in accordance with these instructions and keep well lubricated
(where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of
days.

ACCESSORIES

Metal cutting discs
Abrasive cutting disc
Grinding disc
Hex key
Charger (WA3860)
Battery Pack (WA3551.1)
We recommend that you purchase your accessories from the same store that sold
you the tool. Refer to the accessory packaging for further details. Store personnel
can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.

INTENDED USE:

The machine is intended for cutting, roughing and brushing metal and stone
materials without using water. For cutting metal, a special protection guard for
cutting (accessory) must be used.

ASSEMBLY AND OPERATION

BEFORE OPERATION
Removing the Battery Pack
Charging the Battery Pack
ASSEMBLY
ACTION
WX801 WX801.9
2
1
1
1
1
1
See Fig. A1
See Fig. A2
2
1
1
1
/
/
EN
15
FIGURE