Harder & Steenbeck COLANI Bedienungsanleitung Seite 9

Operating instructions
Faultfinding and Correction
Problem: Liquid bubbling within the colour cup.
Diagnosis: Leaking nozzle seal.
Cure:
Tighten air cap
Clean seal-surface and seal-contact areas on the airbrush body.
Or renew seal if necessary.
Guarantee
Harder and Steenbeck guarantee this product for 24 months from the date of
purchase against any material or manufacturing fault, providing it has been
handled and used with due care. The guarantee does not cover wear and tear
on items such as seals, nozzles, needles etc.
EC Declaration of Conformity
Airbrushes made by Harder & Steenbeck have been developed, designed and
manufactured in accordance with EC directive 98/37/EG. The following har-
monized Standards have been applied during this process: DIN EN 292,
Sicherheit von Maschinen, Geräten und Anlagen (Safety of Machines,
Appliances and Systems), DIN EN 1953, DIN 31000, DIN 31001 Teil (Part) 1,
BGR 500 (BGV D25), BGV D24 and, if required, ZH 1/406, ZH 1/375 and ZH
1/181.
Jens Matthießen
Harder & Steenbeck
Metallwarenfabrik
9